hooglpic.blogg.se - Blind rivet gun

What are the applications of the Structural Rivets?.

– Drill through the head of the rivet to remove the rivet body and in turn remove the rivet head. – Choose a drill bit to match the diameter of the installed rivet However, they can be removed in the same way as removing a standard blind rivet: Structural Rivets are designed for a permanent joint of materials. (Note: Always prepare hole size to the manufacturers specification.) The grip range is the material thickness that the rivet is capable of joining. The diameter of the rivet is the diameter of the rivet body, the part being inserted in the pre-drilled hole. Rivets are measured using their diameter and grip range.

How can I measure structural pop rivets?.

The jaw mechanism of the tool grips and pulls the mandrel through the rivet body and breaks the mandrel when the rivet is set. Make sure you have the correct nose tip fitted! – Insert the rivet mandrel into the tool. – Drill a hole through the materials to be joined Refer to the rivet’s data sheet for this information. – Check the specifications of the structural rivet you are installing and choose a drill bit to match the hole size specification for the rivet. The installation process of Structural Rivets is the same as it is of standard rivets: Structural Rivets are installed using a hand rivet tool, a battery/cordless rivet gun, or an air rivet gun. As a result, they provide a water-tight, vibration resistant connection between multiple materials, with increased shear and tensile strength. Structural Rivets, also known as Structural Pop Rivets and Structural Blind Rivets, are high strength rivets designed with a locking mechanism to hold the mandrel inside of the rivet body after installation.